The popular IFR 6000 Ramp Test Set is designed for testing A/C/S transponder modes, DME, TCAS, 1090 mHz ADS-B, 978 ADS-B(UAT) and TIS avionics systems.

IFR 6000 features include: 

• Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
• ADS-B TX/RX
• TIS
• ICAO Annex 10 amendment 77
• Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
• Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
• Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II installations.
• Detachable directional antenna
• Large 5.7-inch LCD display
• Simple user interface
• Lightweight at less than 8 lbs. 

 

Do you need your Aeroflex IFR6000 repaired or calibrated?

For further information regarding repair and calibration capability, NATA certificates for specific products or to place a calibration order, please contact the Service Co-ordinator at This e-mail address is being protected from spambots. You need JavaScript enabled to view it with unit details and service requirements.

 

For further product information visit www.aeroflex.com